How to remove car sticker

These days decals are getting more popular cause of their use of advertising purpose. So now
every person is using his own sticker to make his company popular even sellers and dealers also. Due
to these stickers your car get coverd but no one like everyone wants his car neat and clean. Also if you want
to sell your car and unfortunatly there is a sticker on car bumper or anywhere with something bad sign. So now here are two methods to remove all kind of stickers. Let me clear the different types of these stickers.

Temporary Sticker
Permanent Sticker
Very tough Sticker

First Method:
This is easy method to remove Sticker. First of try to peeling sticker carefully with razor or finger. You can also heat it to loosen but be careful it can melt the sticker.

Now spray lubricant into the sticker. WD 40 lubricant is prefered but you can also use any other like Triflow. This should release the seal of the bumper sticker and allow you to continue peeling.

Keep spraying and peeling with finger untill the sticker is completely removed.

Now in the last Wipe down the clean the part to remove excess lubricant.


Second Method:

This is a safe method to remove sticker. In this method must have Hair dryer or heat gun you can also get it at rent.

Turn a hairdryer on high heat and hold it about 6 inches from the sticker and blow the heat directly on the sticker.If you are using heat gun the it must be eight to 10 inches away cause it works much faster than hair dryer. Heat the sticker for few minutes.

When the sticker is loose enough try to lift from corner with fingernail. Don't try to pull up, pull it back otherwise there will be chances to of tearing the sticker, folding the corner over against the face of sticker. If the corner won't lift you can also use blade to get it started.

Continue peeling the sticker back, continue to apply heat as needed. But be careful in applying heat, don't apply constant heat, specially if using a heat gun, as this can melt the sticker.

Once the sticker is completely off, now it is necesary to remove remaining sticky residue. Now apply any automative adhensive cleaner WD 40 or PPG Ditzo DX 440.

At last wipe away with a clean and soft cloth.

Posted in: How to